How Are Road Bike Handlebars Measured
There are a few ways to measure road bike handlebars. The most common method is to use a tape measure. Start by measuring the distance from the center of the stem to the outside edge of the drop (the part of the bar that angles down).
This measurement is typically between 38 and 42 centimeters. Next, measure the width of the handlebar at its widest point. This measurement is usually between 31 and 33 centimeters.
Finally, measure the height of the drop from the top of the bar to where it meets the stem. This measurement is typically between 10 and 12 centimeters.
There are a few different ways to measure road bike handlebars. The most common way is to measure from the center of the handlebar top (where the stem meets the handlebar) to the outer edge of each drop. This measurement is typically between 40 and 44cm.
Another way to measure road bike handlebars is from the center of the stem to the center of the bend in the drop, which is typically between 38 and 42cm. Finally, some manufacturers measure from the end of the straight section of handlebar (near where your hands rest when you’re not gripping the drops) to the outer edge of each drop. This measurement is typically between 36 and 40cm.
How To Choose The Right Handlebars For Your Road Bike
How Do I Know What Size My Handlebars Are?
One of the most important aspects of choosing the right handlebars for your bike is getting the right size. But how do you know what size your handlebars are?
There are a few different ways to measure handlebars, but the most common is to measure from the center of the stem to where the bars curve down at the ends.
This measurement is called the width or reach.
The other measurement that’s important is the drop, which is simply how low the bars sit in relation to the stem. Drop can be measured from either end of the bar, but it’s more commonly measured from the center.
Once you have these measurements, you can start shopping for handlebars that will fit your bike. Most manufacturers will list both width and drop measurements for their bars, so it’s just a matter of finding something that falls within your desired range.
If you’re unsure about what size bars to get, there are a few general rules of thumb that can help you out.
For road bikes, wider bars (42cm+) are typically used for racing while narrower bars (38-40cm) are better suited for long distance riding and leisurely pace rides. For mountain bikes, wider bars (720mm+) offer more control and stability while narrow bars (660-680mm) are easier to maneuver through tight spaces. And finally, for BMX bikes, wider bars (28-30″) provide more leverage while narrower bars (24-26″) allow for greater control when doing tricks and stunts.
Of course, these guidelines are just that – guidelines. The best way to find out what size handlebars work best for you is to experiment with different widths and drops until you find something that feels comfortable and gives you confidence on your bike.
Where are Road Handlebars Measured From?
There are a few different ways that people measure road handlebars, but the most common way is from the center of the bar to the outside edge. This gives you a good idea of how wide the bars are, and is generally the measurement that is used when talking about handlebar width. Another way to measure road handlebars is from the stem to the end of the bars.
This method is less common, but can be useful if you want to know how much space you have for your hands on the bars.
What is the Standard Road Bike Handlebar Size?
The average road bike handlebar size is 40cm. However, this can vary depending on the make and model of the bike. Some bike manufacturers will have different sized handlebars for different models.
For example, a racing bike may have a smaller handlebar than a touring bike. There are also different widths of handlebars available. The most common widths are 38cm and 42cm.
Again, this can vary depending on the manufacturer and model of the bike. If you are unsure about what size road bike handlebar you need, it is best to consult with your local bicycle shop or thebike manufacturer directly.
Credit: livetoplaysports.com
Road Bike Handlebar Width
Handlebar width on a road bike can have a big impact on how comfortable you are while riding. If your handlebars are too wide, you may find yourself constantly reaching for the brakes or shifters. If they’re too narrow, you may feel cramped and uncomfortable.
The best way to determine the right width for your road bike handlebars is to take your measurements. Start by measuring the distance between your shoulders. Then, measure the distance from your hands to your elbows.
Add these two numbers together to get your ideal handlebar width in inches.
Once you have your measurement, select a road bike handlebar that’s close to that width. If you’re unsure of which width to choose, always err on the side of caution and go with a wider option.
You can always trim down the bar if it’s too wide, but you can’t make it wider if it’s too narrow!
Conclusion
Road bike handlebars are measured in many different ways. The most common way is by the width of the handlebar. This measurement is usually done in millimeters and is measured from the center of the handlebar to the outside edge.
Another way to measure road bike handlebars is by the drop. The drop is the distance from the top of the handlebar to the bottom of the hand grip. This measurement is usually done in centimeters.