How To Pump Road Bike Tires Effectively
To keep your road bike running smooth and fast, pumping the tires on a frequent basis is a must.
You will need to know about different methods of pumping for using it at any moment while riding.
Pumping road bike tires is a simple but systematic task. The rider must know the procedure of making it efficient and safe for the tube.
In a lot of cases, excessive pumping causes permanent damage to the tube.
Also, pumping the tires less than necessary makes it difficult for the rider to drive the bike properly.
Bringing both of these concerns together, you should have the tools and apparatus for this purpose.
The process is very simple. You need to identify the type of valve attached to the tire. It can be presta, woods or Schrader valve.
Then, grab a pumper. You may buy one for a permanent use for the bike or borrow from a friend depending on the convenience. Now, open the valve and set an adapter if necessary.
Make it completely sure that there is no leakage on the adapter. Start pushing the pump to inflate the tire eventually. Measure the required PSI in order to avoid the tire to burst out.
Road bike tires are quite flexible. So, you don’t have to worry much about damaging it with an excessive amount of air pressure.
When it is ready, you can take out the adapter and start riding.
If you are eager to know more techniques for each type of valves and the benefits of pumping tires, the later discussion will be very useful.
Carry on for more information in the following section.
What Required For Road Bike Tires to be Pumped?
The first clue for a deflated tire can be found by observing.
Whenever you ride on the road bike, you can see the tire is getting lower than the normal size.
This decreasing sign happens if there is no air pressure in the bike tube.
Start the pumping process as soon as possible after noticing this matter.
The second thing you will feel is a decreased speed of the road bike. You will constantly feel an inefficient speed after pedaling the bike.
The outcome from the pedaling will be less than the input. This will happen for a deflated tire of the bike. To get rid of the problem, continuously check the air pressure.
A sudden bursting sound coming out from the road bike tires indicates that there is no air in the tube.
Either you have to fix the tube or pump it properly before the next use.
And, try to get the road bike tire pumped on a regular basis for getting rid of any uncertain condition.
A precondition for efficient pedaling is having properly inflated tires.
You may pump the tires on weekly basis.
For frequent users, try to make it twice a week. This will save a lot of energy while riding on the bike.
How to Get the Bike Tires Pumped With Different Valves?
We have already stated that there are three types of road bike tire valves.
Though the pumping process is almost the same, each of the valves requires a little bit of customization.
The process is described in the following –
Pumping a road bike tire with Presta Valves
The procedure is given in the following.
Step 1: Open the brass Cap
Presta valves are highly technological valves. It can keep the air pressure to the maximum level. When you require pumping a tire that has this type of valve, start with removing the cap.
There is a black brass cap attached at the top of the valve. Remove it.
Step 2: Loosen the springy screw
Now, loosen the springy stem and press it. The air from inside the tire will start to get out of the tube.
Step 3: Place the nozzle on the stem
Attach the air nozzle of the pumper to the stem. Fix the position and airtight the valve.
Step 4: Pumping Tires
Finally, start pumping until the required PSI is met. Do the reverse process for finalizing the process.
Rather than keeping the nozzle attached to the valve, simply replace using your thumb. This replacement should be done within a second for saving the air of the tube.
Pumping a road bike tire with Woods Valve
If you have a broad road bike tire, there is a huge opportunity that it will come with woods valves.
This is also called the Dunlop valve. European riders are familiar with it.
The process is same as the Presta valves. The only difference is that there is no springy valve stem.
You will have to use your thumb or an airtight adapter to stop the air.
Pumping a road bike tire with Schrader Valves
Schrader valves are mostly used in American road bikes.
This is an open valve with an extremely great technology. You just need a special adapter for inflating the tire.
In the market, there are plenty of pumpers with the nozzle for making it compatible with the Schrader valves.
Step 1: Measure the Required PSI
Calculate how much air you need to put inside the tire. You can take the bike to a gas station for this information as well.
Step 2: Attach the nozzle
Then, add the nozzle on the Schrader valve. You will hear a small click while doing it. This happens because of the springy stem inside the valve system.
It releases the pressure and lets the air flow from the pumper to tires.
Step 3: Pump accordingly
Start pumping slowly and finish the process. Unlock the airtight switch of the adapter and remove the pumper.
There is no extra cap or adapter required to add after the pumping.
Hassle-free pumping experience from Schrader and Presta valves has made these two favorite among the riders.
You can pump a tire without taking it to a shop!
Why Regular Pumping of a Road Bike Tire Is Important?
Pumping is not only helpful for riders, but also for the health of the tire.
After every ride, the bike has to go under a lot of wear and tear. Tire pumping comes handy in solving these issues.
Also, it provides a maximum support to the riders for the next ride.
An inflated tire helps in getting rid of unfriendly bumping while riding.
So, the exterior of the road bike remains undamaged. Regular pumping is good for the muscles too.
The rider does not have to pedal more than required. Deflated tires create problems for efficient pedaling.
There can be risks of getting muscle pain or injuries.
Durability of tires depends highly on the pumping procedure and frequency.
This should be frequent and regular to increase the durability.
The longevity of a tire depends if the bike tires are inflated regularly using a pumper.
How Much This Discussion Helped You?
Do you pump tires frequently?
If this discussion helped you in this task, let us know. We appreciate your valuable comment and suggestion.
What type of valve you use? Is it giving you the best service?
Try any of the methods and inform us the result in the following section.
Leave a comment for joining us.